Products

This salt fog test cabinet meets the requirements of salt spray tests, such as ASTM B117, ISO 9227.
Temperature Range:Ambient ～ +60 ℃
Humidity Range:95% ~ 98% RH
Spray Type:Continuous / Periodic
Materials:Glass fiber reinforced plastics
Standard:ASTMB117, ISO9227
Volume:110L, 250L, 7500L,1000L, 1500L

Salt spray tester combining salt spray with other environmental conditions such as controlled temperature, humidity and SO2 corrosion gas.
Temperature Range:+10 ℃ ～ +90 ℃
Humidity Range:30% ~ 98% RH
SO2 Gas Control:Control and display volume of SO2 gas
Cooling system:Mechanical compression refrigeration system
Air Preheating:Saturated air barrel (31Liter)
Spraying System:Atomizer tower and Spray nozzles

Cyclic corrosion chamber combining salt spray with other environmental conditions such as controlled temperature, humidity and SO2 corrosion gas.
Temperature Range:+10 ℃ ～ +90 ℃
Humidity Range:30% ~ 98% RH
Cooling system:Mechanical compression refrigeration system
Air Preheating:Saturated air barrel (31Liter)
Spraying System:Atomizer tower and Spray nozzles
Salt Fog Collected:Fog collector and fog measure cylinder

Salt mist chamber combining salt spray with other environmental conditions such as controlled temperature, humidity and SO2 corrosion gas.
Temperature Range:+10 ℃ ～ +90 ℃
Humidity Range:30% ~ 98% RH
Salt Fog Deposition:1～2ml / 80cm2 · h
Cooling system:Mechanical compression refrigeration system
Air Preheating:Saturated air barrel (31Liter)
Spraying System:Atomizer tower and Spray nozzles

LIB benchtop environmental test chamber achieves high performance to fulfill your temperature and humidity testing needs.
Lowest Temperature:-20℃/-40℃/-60℃/-120℃;
Temperature Range:-40℃～+150 ℃;
Humidity Range:20% ~ 98% RH;
Built-in lighting for observing the test
Water Purification and Recirculation System
Access port to power the sample

LIB Mil std 810d Test Chamber can perform reliability in compliance with the test standards MIL STD 810.
Name:blowing sand and dust test chamber
Model:DI-1000
Capacity:800L/1000L/1500L/2000L and more
Temperature Range:Ambient ~ +50℃
Humidity Range:< 30% RH
Normal Wire Diameter:50um

The stability test chamber simulates the condition of temperature and humidity combination, high and low temperature, temperature cycle, high temperature and high humidity, and low temperature and humidity.
Lowest Temperature: -20℃/-40℃/-60℃/-120℃;
Temperature Range:-120℃～+150 ℃;
Humidity Range:10% ~ 98% RH;
Comprehensive Line of Environmental Chambers
50L/80L/100/225L/500/1000/1500L
Ranging in size from small benchtop units to large walk-in chambers

LIB ip dust chamber can be used to perform ingress protection tests in accordance with the test standards IEC60529. More than 14 models for choose.
Model:DI-1000
Capacity:800L/1000L/1500L/2000L and more
Temperature Range:Ambient ~ +50℃
Humidity Range:< 30% RH
Normal Wire Diameter: 50um
Nominal Width of a Gap Between wires:75um

LIB thermal test chamber is designed for testing specimens under the rapid temperature change. 
Lowest Temperature:-20℃/-40℃/-60℃/-86℃;
Cooling Rate:10 ℃ / min （average）
Heating Rate:10 ℃ / min （average)
Touch-screen programmble controller,Ethernet access
Exterior Material:Steel Plate with protective coating
Interior Material:SUS304 stainless steel

LIB designed and produced different size and configuration of dust chamber, which is suited for dust environmental testing.
Capacity:800L/1000L/1500L/2000L and more
Temperature Range:Ambient ~ +50℃
Humidity Range:< 30% RH
Normal Wire Diameter: 50um
Nominal Width of a Gap Between wires:75um
Blowing Time:0 ~ 99H59M

LIB temperature shock chamber can be performed during thermal shock testing from -70 to +200°C, comes in a variety of sizes and performance configurations. Lower limit Temperature:-75℃ Upper limit Temperature:+220℃ Temperature Range:-70℃～+220 ℃ Temperature Recovery Time: Within 5 minutes The specimen automatic transferred from cold chamber to hot chamber by basket. Refrigerant: Environmental refrigerant

This compact environmental chamber is designed with special features that allow it to provide small footprint and maximize workspace.
Lowest Temperature:-20℃/-40℃/-60℃/-120℃;
Temperature Range:-40℃～+150 ℃;
Humidity Range:20% ~ 98% RH;
Water Purification and Recirculation System
Access port to power the sample
Small footprint and maximize workspace