Products

LIB Industry TH-100 Temperature And Humidity Control Chamber provides the widest range of temperature or temperature and humidity environments.
Lowest Temperature: -20℃/-40℃/-60℃/-70℃;
Temperature Range:-20℃～+150 ℃;
Humidity Range:20% ~ 98% RH;
Comprehensive Line of Environmental Chambers
50L/80L/100/225L/500/1000/1500L
Ranging in size from small benchtop units to large walk-in chambers.

LIB Industry TH-225 Temperature Humidity Climate Chamber provides the widest range of temperature or temperature and humidity environments.
Lowest Temperature: -20℃/-40℃/-60℃/-70℃;
Temperature Range:-20℃～+150 ℃;
Humidity Range:20% ~ 98% RH;
Comprehensive Line of Environmental Chambers
50L/80L/100/225L/500/1000/1500L
Ranging in size from small benchtop units to large walk-in chambers.

LIB Industry TH-500 Temperature Relative Humidity Oven is designed to provide the environment with accurate control of relative humidity and temperature is required.
Model: TH-500
Lowest Temperature: -20℃/-40℃/-60℃/-86℃;
Temperature Range:-86℃～+150 ℃;
Refrigerant: Environmental refrigerant;
Temperature and Humidity condition
Touch-screen programmble controller,Ethernet access

LIB Industry Air To Air Thermal Shock Chamber is designed for testing specimens under rapid temperature change
Lowest Temperature:-20℃/-40℃/-60℃/-70℃;
Cooling Rate:10 ℃ / min （average）
Heating Rate:10 ℃ / min （average)
The temperature ramp rate is controllable at 5℃ / 10℃ / 15℃ per minute.
Volume:100L, 225L, 500L, 800, 1000L, 2000L, 3000L

LIB Industry TS-162 Thermal Shock Tester can be performed during thermal shock testing from -70 to +200°C, comes in a variety of sizes and performance configurations.
Lower limit Temperature:-75℃
Upper limit Temperature:+220℃
Temperature Range:-70℃～+220 ℃;
Temperature Recovery Time: Within 5 minutes
Refrigerant: Environmental refrigerant;
Touch-screen programmble controller, Ethernet access

LIB Industry TR5-500 Thermal Cycling Test Equipment is designed for testing specimens under rapid temperature change
Model:TR5-500
Lowest Temperature:-20℃/-40℃/-60℃/-70℃;
Cooling Rate:10 ℃ / min （average）
Heating Rate:10 ℃ / min （average)
The temperature ramp rate is controllable at 5℃ / 10℃ / 15℃ per minute.
Volume:100L, 225L, 500L, 800, 1000L, 2000L, 3000L

LIB Industry TR5-800 Environmental Stress Chamber is designed to enhance the strength and reliability of components,requires a quick, uniform, and reproducible change in temperature.
Lowest Temperature:-20℃/-40℃/-60℃/-70℃;
Cooling Rate:10 ℃ / min （average）
Heating Rate:10 ℃ / min （average)
Refrigeration Mode: Air-cooled or water-cooled
Touch-screen programmble controller, Ethernet access
Exterior Material: Steel Plate with protective coating

ASTM B117 Salt Spray Corrosion Test Chamber combining salt spray with other environmental conditions such as controlled temperature, humidity, and wetting.
Temperature Range:+10 ℃ ～ +90 ℃
Humidity Range:30% ~ 98% RH
Temperature Deviation:± 2.0 ℃
Humidity Deviation:+2%, -3%
Salt Fog Deposition:1～2ml / 80cm2 · h
Cooling system Mechanical compression refrigeration system

ASTM G85 Salt And SO2 Spray Test Chamber combining salt spray with other environmental conditions such as controlled temperature, humidity and SO2 corrosion gas.
Temperature Range:+10 ℃ ～ +90 ℃
Humidity Range:30% ~ 98% RH
Cooling system:Mechanical compression refrigeration system
Air Preheating:Saturated air barrel (31Liter)
Spraying System:Atomizer tower and Spray nozzles
Salt Fog Collected:Fog collector and fog measure cylinder

LIB Industry JIS Z 2371 Salt Spray Test Chamber is including basic salt spray chambers and cyclic corrosion chambers.
Temperature Range:Ambient: ～ +60 ℃
Humidity Range:95% ~ 98% RH
Temperature Deviation:± 2.0 ℃
Salt Fog Deposition:1～2ml / 80cm2 · h
Spray Type: Continuous / Periodic
Materials: Glass fiber reinforced plastics

LIB Industry designed and produced different size and configuration of DI-800 Dust Chamber Talcum Powder, which is suited for dust environmental testing.
Capacity:800L/1000L/1500L/2000L and more
Temperature Range:Ambient ~ +50℃
Humidity Range:< 30% RH
Normal Wire Diameter: 50um
Nominal Width of a Gap Between wires:75um
Blowing Time:0 ~ 99H59M

LIB Industry DI-1000 Dust Climatic Chamber can be used to perform ingress protection tests in accordance with the test standards IEC60529. More than 14 models for choose.
Model:DI-1000
Capacity:800L/1000L/1500L/2000L and more
Temperature Range:Ambient ~ +50℃
Humidity Range:< 30% RH
Normal Wire Diameter: 50um
Nominal Width of a Gap Between wires:75um